• La scheda di controllo KT332N funziona perfettamente con RDWorks (incluso) per PC Windows e LightBurn (NON incluso).

• RDWorks e LightBurn sono compatibili con Windows 7, 8, 10 (64/32 bit), XP, 2000 e Vista.

• Il controller è compatibile con macOS (versione 10.11 e successive) SOLO se si utilizza il software LightBurn.

• Formati grafici supportati: BMP, GIF, JPEG, PCX, TGA, TIFF, PLT, CDR, DMG, DXF, PAT, CDT, CLK, DEX, CSL, CMX, AI, WPG, WMF, EMF, CGM, SVG, SVGZ, PCT, FMV, GEM, CMX.

• Connettore porta a 4 pin per dispositivi ad asse rotativo

• DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8.

• USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs.

• LINEAR RAIL GUIDING SYSTEM: Equipped with X and Y stepper motors for efficient power transmission between the guide rails with high precision and long service life. 

• VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it’s equipped with a sepia tint to protect your eyes from indirect laser beam exposure.

• RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process.

• ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75” or be fully retracted, allowing more control over different focal distance setups.

• AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.

• TWO-WAY PASS-THROUGH: There’s always extra room! Equipped with front and rear pass-through doors to accommodate materials larger than the workbed size.

• ADDITIONAL WORKBED: Equipped with an extra honeycomb workbed to keep smaller, lightweight materials in place throughout the engraving process.

• BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine.

• WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 60–70°F (16–21°C).

• WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. 

• AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the “Enter” button to continue operation.

• 1x Incisore laser
• 1 x Pompa dell'acqua
• 1x Ventilatore di scarico dell'aria (installato)
• 1x Tubo di scarico
• 1x Tubo laser (installato)
• 1 x borsa per accessori
• 1x Manuale di istruzioni
• 1 x Cavo USB
• 1x Chiave USB
• 1 x Cavo di alimentazione
• 1x Chiave
• 1x Chiave
- 1x RDWORKS V8

• Non c'è da preoccuparsi! Offriamo una garanzia di 2 anni su tutte le macchine.

• Garanzia di 1 anno sui tubi laser e sugli alimentatori laser da 80W in su.

• Certificazione FDA

• Certificazione CE

• Certificazione di qualità ISO9001